Falcon
Corrugated Stainless Steel Flexible Toilet Supply Hose - 9" - safer alternative to braided hose.
Full port for maximum water flow. No plastic nuts or rubber
tubing. 7/8" Brass Ballcock for connection to the bottom of
the toilet tank and a 3/8" compression fit to the
shutoff valve. Available in both 9" and
12" lengths.
Falcon hoses will not discolor,
corrode or rust nor will they crimp or kink. Other features
include.......
- 304 Series Corrugated
Stainless Steel
- Stronger and more flexible
than copper
- Re-usable and Re-bendable
- Minimal deformity in
Curvature...these hoses will hold a bend
- Burst pressure rated to
2200psi
- Re-Usable and Re-Bendable
- No Galvanic Effect (no
dielectric union is needed)
- All fittings are chrome
plated solid brass
- High temp EPDM Washer
(-40° to 220° F)
- 100% leak tested
- Falcon Warranty
Tools Required
- The fitting on the compression end of this hose can be
tightened with an adjustable wrench or a 11/16" (17mm) open
end wrench. The connection to the toilet tank is
"hand-tighten" only.
Additional Comments
- Stainless steel braided hoses marketed online and in the big
box stores as superior alternative to rubber hoses and rigid
metal pipes. These hoses consist of a flexible rubber inner
tubing surrounded with a stainless steel metal braided sleeve.
Some have metal nuts, others are plastic. There's a fair amount
of discussion online, and a few horror stories, about inspecting
and replacing braided hoses far more frequently than I had
assumed necessary. I will be replacing all of my braided
stainless supply hoses with corrugated stainless this year.
