Prevost
High-Flow Coupler Starter Kit (for hoses with 3/8" NPT end
fittings) - one 3/8"
Female NPT coupler, three matching
1/4" NPT "High Flow" male plugs (for use with tools
& accessories) and one 3/8" NPT
High Flow female plug (for use on the end of hoses). This European High Flow profile uses a
threaded plug (male for tool bodies, female for hose connections)
which flow approx 33% more volume vs standard Industrial or
Truflate profiles. See photo1 and photo 2. Recommended for paint shops....sanders
and grinders have higher CFM requirements compared to standard
impact tools.
Prevost "Standard" quick couplers release with a single push of the button
on the side of the coupler, an easy one-handed operation.
Technical features of this coupler include........
- 1/4" Flow (37.7cfm)
- European High Flow Profile
- Nitrile seals for leak free
connections
- Stainless steel spring
- Impact resistant plastic
composite body
- 175psi working pressure
- Push to connect
- Push button disconnect
Note on Thread Size -
Thread Size (NPT) does NOT refer to the physical dimension of the
pipe or fitting. Please refer to the table below if you're unsure
of which size to buy. For example, a 1/4" NPT pipe thread
(common air tool fitting size) has an outer diameter of
0.540".
Outside Diameter
(OD/inches) = Pipe Thread Size (NPT)
- 13/32 (.405") =
1/8" NPT
- 35/64 (.540") =
1/4" NPT
- 43/64 (.675") =
3/8" NPT
- 27/32 (.840") =
1/2" NPT
- 1-3/64 (1.050") =
3/4" NPT
