Facom
Non-Sparking Multigrip Pliers (482.30SR) - Special non sparking and anti-magnetic
Copper-Beryllium alloy. For safety purposes, FACOM uses sheaths
in overmoulded antistatic pvc to
- 300mm Length
- Jaw Opening Width: 55mm
- Weight: 745g
The FACOM ADF tool range
has been designed for use in explosive or flammable atmospheres,
where traditional steel tools may accidentally create
sparks due to friction, impact, or by falling on a hard surface.
The entire FACOM ADF range is made from a special Copper -
Beryllium alloy having better mechanical properties than the
other alloys proposed for use in explosion-proof tools. In
addition to its explosion-proof properties, the Cu-Be alloy is
also anti-magnetic and highly corrosion resistant. Having a lower
density, it also significantly reduces user fatigue.
FACOM ADF tools have been
designed in accordance with the most widely used dimensional
standards (ISO, DIN, BSI, NF, etc.) or adapted to perform the
tools main functions. FACOM ADF tools can be used in a wide
variety of fields, such as:
- Mining
- Petrol and
gas extraction (off-shore and on-shore)
- Refineries,
petrochemicals
- Pipeline
maintenance
- Energy
production and transport (gas, electricity, etc.)
- Naval
shipyards
- Aeronautical
transport, airports
- Paint
manufacture
- Manufacture
of explosives & flammable products
- Arsenals,
munitions and explosive products storage
- Applications
requiring demagnetized tools (metal shavings, etc.)
- Farming -
Grain silos
The certificate TUV
(n°TUV-F 09 ATEX 0005 X) has been found to comply with standards
for a use in explosive atmospheres and with the Essential Health
and Safety Requirements following 1127-1, EN 13463-1 (2007) et EN
13463-5 (2003).
Safety
Non sparking tools
is not enough for protecting from an explosion, other items
adapted to the environment are necessary, such as: clothes,
gloves, safety glasses and adapted materials.
Tools
surface temperature must not be more than present gases
temperature.
Cu-Be alloy tools
must not be in contact with acetylene (risk of spark).
All Cu-Be alloy
tools, in the state of finished product, presents no risk for the
user. On the other hand any modification of these tools presents
a risk of Cu-Be alloy particles liberation, harmful to one's
health.