Falcon Corrugated Stainless Steel Flexible Toilet Supply Hose - 9" - safer alternative to braided hose. Full port for maximum water flow. No plastic nuts or rubber tubing. 7/8" Brass Ballcock for connection to the bottom of the toilet tank and a 3/8" compression fit to the shutoff valve. Available in both 9" and 12" lengths.

Falcon hoses will not discolor, corrode or rust nor will they crimp or kink. Other features include.......

• 304 Series Corrugated Stainless Steel
• Stronger and more flexible than copper
• Re-usable and Re-bendable
• Minimal deformity in Curvature...these hoses will hold a bend
• Burst pressure rated to 2200psi
• Re-Usable and Re-Bendable
• No Galvanic Effect (no dielectric union is needed)
• All fittings are chrome plated solid brass
• High temp EPDM Washer (-40° to 220° F)
• 100% leak tested
• Falcon Warranty

Tools Required - The fitting on the compression end of this hose can be tightened with an adjustable wrench or a 11/16" (17mm) open end wrench. The connection to the toilet tank is "hand-tighten" only.

Additional Comments - Stainless steel braided hoses marketed online and in the big box stores as superior alternative to rubber hoses and rigid metal pipes. These hoses consist of a flexible rubber inner tubing surrounded with a stainless steel metal braided sleeve. Some have metal nuts, others are plastic. There's a fair amount of discussion online, and a few horror stories, about inspecting and replacing braided hoses far more frequently than I had assumed necessary. I will be replacing all of my braided stainless supply hoses with corrugated stainless this year.