Sub-Total
Sawing/Cutting/Drilling
USAG
Hole Saw Arbor with Drill Bit (for sizes 35-64mm)(988 GA2)....included with the 10pc set. Available
for purchase separately...much cheaper than Facom's 609A.M2. For
hole saw sizes 35-64mm....
Model:
U09880135Q
Facom
Twin Blade Electrician's Knife (640180).....ideal for all common cable cutting
& stripping tasks.
1 straight hollow ground
general-purpose blade.
1 short curved...
Model:
640180
Facom
Bi-Hard Cobalt Hacksaw Blade-10 tooth per cm (668A.10) - the new 668 Series blades (668A/668B) are made from
cobalt steel . Cobalt has a better resistance to warm-up, and
contributes to...
Model:
668A.10
USAG
Cobalt Steel BiMetal Hacksaw Blades-24 tooth (10 tooth per
cm)(668A.10-USAG) -
identical to Facom's 668A/668B series blades but less expensive
and sold in a reusable storage case....
Model:
U020000202
Facom
Bi-Hard Cobalt Hacksaw Blade-12 tooth per cm (668A.12) - the new 668A blades are made from
cobalt steel . Cobalt has a better resistance to warm-up, and
contributes to the reduction of...
Model:
668A.12
USAG
Cobalt Steel BiMetal Hacksaw Blades-32 tooth (12 tooth per
cm)(668A.12-USAG) -
identical to Facom's 668A/668B series blades but less expensive
and sold in a reusable storage case....
Model:
U020000203
Facom
Bi-Hard Cobalt Hacksaw Blade-8 tooth per cm (668A.8) - the new 668 blades (668A/668B) are made from
cobalt steel . Cobalt has a better resistance to warm-up, and
contributes to the...
Model:
668A.8
USAG
Cobalt Steel BiMetal Hacksaw Blades-18 tooth (8 tooth per
cm)(668A.8-USAG) -
identical to Facom's 668A/668B series blades but less expensive
and sold in a reusable storage case....
Model:
U020000201
Facom
ISO Stepped Drill Bit (6.5-40.5mm) - For cylindrical high accuracy drilling in all
diameters. Does not require a tapping hole.
Cylindrical shank with 3
flats for proper...
Model:
678006
Facom PG
Staged Drill Bit (6-37mm) - For cylindrical high accuracy drilling in all
diameters. Does not require a tapping hole.
Cylindrical shank with 3
flats for proper drive,...
Model:
678014
Currently out of Stock
$165.00
Facom
Ratcheting Tap Wrench (830A.10) - for tap sizes to M12 (approx 1/2").
Features.....
Two-way ratchet
Fixed position (for R&R
of retainer collet)
Polished...
Model:
830A.10
Facom
Long Reach Ratcheting Tap Wrench (830A.10L) - for tap sizes to M12 (approx
1/2"). Ideal for cutting threads in tight recesses.
Features.....
Two-way ratchet
Fixed...
Model:
830A.10L
