(CM.160A) -Mechanical Master Tool Set-527pc (Freight!)

Facom 528pc Metric and Fractional Tool Set (CM.160A) -  actual freight costs apply. Contents include......

• 18 piece combination wrench set 6 to 24mm. 6 piece combination wrench set 26 to 30 & 32mm.
• 4 piece long combination wrench set 33, 35, 36, 38mm. 10 piece roll set of short combination wrench set 3.2 to 11mm.
• 12 piece open – end wrench set 6 to 32mm. 5 piece roll set of flare – nut wrench set 7 to 19mm.
• 6 piece roll set of low profile open – ended wrench set 8 to 19mm.
• 2 piece adjustable wrench set 6″ & 10″.
• pin wrench.
• 29 piece 1/2″ socket set 8 to 32mm & accessories (in a case).
• 1/2″ long hinged handle.
• 26 piece 1/4″ socket set 5.5 to 14mm & accessories (in a case).
• 16 piece 3/4″ truck socket set 30 to 55mm & accessories (in a case).
• Torque wrench 40 to 200 Nm with ratchet.
• 3 piece screwdriver set for slotted heads 3.5×75 – 4×100 – 5.5x100mm.
• 2 piece screwdriver set for slotted heads 6.5×100 – 8x200mm.
• screwdriver for slotted heads with hexagonal shoulder.
• 3 piece Phillips screwdriver set for head no. 0 – 1 – 2.
• Phillips Screwdriver for head no. 3 with hexagonal shoulder.
• 3 piece pozidriv screwdriver set for head no. 0 – 1 – 2.
• Pozidriv screwdriver for head no. 3 with hexagonal shoulder.
• 5 piece 1000V insulated screwdriver set slotted & Phillips.
• Multifunction tester.
• Voltage tester screwdriver 90 to 480V.
• Screw starter for slotted heads.
• 13 piece NutSpinner Set 3.2-14mm
• 5 piece. Micro NutSpinner Set, in case
• 9 piece sleeve set of hexagon keys 1.5 – 10mm.
• 9 piece sleeve set of ball – end head hex keys: 1.5 to 10mm.
• 8 piece Torx key set TX10 to TX45.
• 5 piece Micro-Tech screwdriver set.
• Combination pliers.
• “Piano wire” diagonal cutters.
• Multigrip pliers.
• Mammoth multigrip pliers.
• Straight half – round nose pliers.
• Angled half – round nose pliers.
• Round – nose pliers.
• Extra long Flat Nose Precision Pliers
• Precision Angled Half Round Nose Pliers
• 509. Lock Grip Pliers
• Flat – nose pliers.
• Heavy – duty end nippers.
• Compound – leverage end nippers.
• Large – capacity lock – grip pliers.
• Compact lock – grip pliers.
• Sliding jaw lock – grip clamp.
• Trigger – release lock – grip pliers (with aluminum sheathing).
• 3 piece inside – circlip pliers 13 – 18 -23.
• 3 piece Outside – circlip pliers 13 – 18 – 23.
• 1 piece Precision diagonal cutters.
• Bolt Croppers
• Nibblers
• Tape measure 2m.
• Scriber.
• Rule 300mm.
• Feeler gauge 19 blades.
• Hacksaw frame.
• 10 piece Bimetal saw blades.
• 5 piece file set.
• 12piece 180mm Needle File Set
• 26 piece set Gasket Punches
• Strap Wrench
• Pipe Cutter 3 – 32mm
• Inch Dies
• Flaring Tool
• Level with Protractor dial
• 8 piece Measuring & Scribing Instrument Set
• Square punch.
• Right – cut scroll shears.
• Thread restorer.
• Spark – plug brush.
• Steel cable cutters.
• Multi-purpose serrated shears.
• Three – square scraper.
• 19 piece Box set of drill – bits 1 to 10 mm.
• 41 piece Tap and die set (in a case).
• Ratchet tool – holder.
• Long ratchet too – holder.
• 2 piece Riveting hammers 24 and 32 mm.
• Heavyweight mallet.
• Dead – blow hammer.
• 5 piece Sheathed nail sets: 2.3 – 4 – 6 – 8mm.
• 5 piece Sheathed drift punche set: 2 – 3 – 4 -6 – 8mm.
• Constant profile cape chisel.
• Precision cape chisel.
• Flat chisel.
• Precision centre punch 4mm.
• Automatic centre punch.
• Pipe wrench.
• Riveting kit.
• Double – action oil can.
• Inspection Lamp
• Crowbar.
• 3 piece leg puller 7 to 140mm.
• Leg Set for Inside applications
• Slide hammer.
• Nut/washer sub – assembly.
• 3 Leg Puller 6 – 80mm
• 10 piece Stud Extractor Set
• Electricians knife with wire stripper.
• Electricians scissors.
• Crimping Pliers & Terminals Set
• Instant Heat 100W Soldering Iron
• Automatic wire stripper/cutter.
• Retractable utility knife.
• Magnetic retriever.
• Articulated Inspection Mirror.